-LevelIII.png)
Overview
What will I learn
Phased Array Ultrasonic Testing (PAUT Welds) - Level III
The Phased Array Ultrasonic Testing (PAUT Welds) Level III course provides comprehensive training and certification for professionals seeking advanced expertise in ultrasonic testing. PAUT is an advanced method used in Industrial Non-destructive Testing (NDT) and involves the use of a probe consisting of multiple small ultrasonic transducers, each capable of independent pulsing. By precisely controlling the timing of these pulses, a pattern of constructive interference is created, resulting in the emission of a quasi-plane ultrasonic beam at a specific angle determined by the progressive time delay. This electronically steerable beam can be swept through the object being examined, and the data from multiple beams are combined to generate a visual image representing a cross-sectional slice of the object. The phased array probe's ability to pulse individual elements at computer-calculated timings enables precise control of the beam. The term "phased" refers to the timing, while "array" refers to the multiple elements.
Course Content:
The Level III course covers a wide range of topics to enhance the knowledge and skills of participants. The course includes:
- PCN requirements for Level III approval
- Complementary NDT methods
- Quality assurance, quality control, and supervision
- Specifications, procedures, and techniques
- Analysis of reports
- Advanced ultrasonic testing theory and revision
- Analysis of procedures
- Procedure writing
- Mock examinations
Responsibilities of Certified Level III:
Individuals certified as Ultrasonic Phased Array Level III have demonstrated competence not only in performing ultrasonic phased array testing but also in directing and supervising other operators. Level III personnel possess the following capabilities:
- The ability to evaluate and interpret results according to existing standards, codes, and specifications
- Sufficient practical knowledge of materials, fabrication, processes, and product technology to select appropriate Ultrasonic Phased Array methods, establish techniques, and assist in defining acceptance criteria when none are otherwise available
- A general familiarity with other NDT methods
- Within the scope of their certification, Ultrasonic Phased Array Level III personnel may be authorized to:
- Assume full responsibility for a test facility or examination center, including its staff
- Establish, review, and validate Ultrasonic Testing instructions and procedures for accuracy and technical correctness
- Interpret codes, standards, specifications, and procedures
- Designate specific Ultrasonic Phased Array test methods, techniques, and procedures to be used
- Perform all tasks at all levels within the scope and limitations of their certification
- Provide guidance to Ultrasonic Phased Array personnel at all levels
- Level III certified personnel may also be authorized to conduct and supervise PCN qualification examinations on behalf of the British Institute of NDT (BINDT).
- It is strongly recommended by BINDT that Level III personnel performing routine NDT duties in a specific product or industry sector hold and maintain Level II certification in the applicable method(s) and sector(s).
Training & Exam Duration:
- The training duration for PCN Level III PAUT is 80 hours, which may vary based on the individual's prior experience. Full PCN certification is achieved upon completion of the required training hours, passing the examination, and acquiring sufficient practical experience. Please contact us for further details.
Experience Requirement:
- For PAUT Level III certification, candidates must meet the experience requirements specified by PCN/GEN for Ultrasonic Testing (UT), including a minimum of 6 months of verifiable experience using UT phased array systems. Please contact us to confirm the specific requirements.
- Note: Work experience is based on a nominal 40-hour workweek or the legal workweek duration.
About this institute
English
Paid