



Alco Inspections is a trustworthy business entity that has come into existence with the prime objective of making customers completely satisfied. Started business in the year 2015, our company, within a very short period, has earned a respectable niche in this competitive industry. Moreover, we have focused on manufacturing, distributing, and supplying a comprehensive range of Electrical Connector, Film Viewer, Magnetic Yoke, Chemical Powder, Electromagnet Coil, Spring Loaded Clamp, MPI Power Source, Dye Penetrant Chemical, Fluorescent Magnetic Ink, and many more. Also, we are acclaimed highly among the large clientele for providing them with trustworthy Inspection Services, Calibration Services,s and many more. Our products are designed with accuracy, keeping all dimensions and customers requirements in mind. We have used advanced production technology to stay in tune with the challenges taking place in the industry. Moreover, to offer the best solutions, we have hired a specialized team who provide solutions according to the exact details provided by the customers.
A. Kathiravan, the honorable Managing Director of Alco Inspections, has led the organization to attain a desirable niche in the industry as well as gain immense clientele support. All because of his sharp domain insight, rich industrial experience, far-sighted approach, and technical expertise.
We have focused all our efforts on rendering the utmost client satisfaction. Therefore, we provide customers only better quality and reliable assortment at reasonable prices. A customization facility is provided to them, and we maintain transparency in our dealings, which further assists us in getting the huge support of customers. Today, we have successfully expanded our networks almost all across the country.

ASTM TEST BLOCK
ASTM test block is also known as MPT test bar used in Magnetic particle inspection. It has 7 numbers of artificial flaws(side drilled holes). Easy to carry on site. Pocket friendly.
KETOS RING
The Ketos Ring is used to check overall performance of the magnetic particle examination system. The Ketos Ring is 5″ in diameter and .875″ thick, with a 1¼” diameter center hole. The block includes (12) thru-holes at .070″ diameter and distances of .070, .140, .210, .280, .350, .420, .490, .560, .630, .700, .770, and .840″ from the OD surface.
MPI WEIGHT LIFT BLOCK (18.0KG)
AC yokes 4.5 Kg with Carrying Handle. Permanent Magnet Test Weight 18Kg with Carrying Handle American Standard 22.5 Kg
MPI WEIGHT LIFT BLOCK (4.5KG)
AC yokes 4.5Kg with Carrying Handle. Permanent Magnet Test Weight 18Kg with Carrying Handle American Standard 22.5Kg
MTU CALIBRATION BLOCK
MPI MTU Test Block Used to test the sensitivity of Wet Method MPI Baths. Quick and easy verification and comparison of magnetic particle materials. The MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials.This two-sided block has a variety of indications ranging in size from small to large.Use the MTU-3 to compare
PIE GAUGE
MPT PIE GAUGE The pie gauge is a disk of highly permeable material divided into four, six, or eight sections by non-ferromagnetic material.

,

ASME ANGLE BEAM CALIBRATION BLOCK
ASME Angle Beam Calibration Blocks contain (4) EDM notches (axial and circumferential on both OD and ID) at a depth of 8-11% of nominal wall thickness x 1/4″ max wide (most notches are approximately .020-.030″ wide) x 1.000″ min long. Blocks 4″ NPS and smaller are left at 360°, while blocks over 4″ are milled to an 8″ arc section. All blocks are 8″ in axial length, or 8T, whichever is greater. Made in accordance with ASME Section V Article 4 Figure T-434.3. In small quantities, blocks can be shipped in approximately 1 week, with rush options always available. Larger quantities will take longer, however, we’re happy to do partial shipments.
ASME ANGLE BEAM CALIBRATION BLOCK FOR PIPE
ASME Angle Beam Calibration Blocks contain (4) EDM notches (axial and circumferential on both OD and ID) at a depth of 8-11% of nominal wall thickness x 1/4″ max wide (most notches are approximately .020-.030″ wide) x 1.000″ min long. Blocks 4″ NPS and smaller are left at 360°, while blocks over 4″ are milled to an 8″ arc section. All blocks are 8″ in axial length, or 8T, whichever is greater. Made in accordance with ASME Section V Article 4 Figure T-434.3. In small quantities, blocks can be shipped in approximately 1 week, with rush options always available. Larger quantities will take longer, however, we’re happy to do partial shipments.
ASTM SINGLE CUSTOM BLOCKS
Blocks are available in exotic alloys, extra small or large diameter FBHs, shapes other than the standard 2″ diameter round, metric dimensions, concave or convex radius ends, or non-typical quantities of blocks pet set. Extra-long blocks up to 40″ metal travel distance at 4″ diameter are also available. Flat-bottom hole diameter: 1/64″ to 16/64″ Metal Travel Distance: .050″ to 40.000″. Material: Most alloys including exotics. Special colored anodizing is available for aluminum blocks. Used for measurement of the sensitivity and/or resolution of normal beam transducers. In accordance with ASTM E127 (aluminum alloys) or E428 (all other alloys).
PAUT- ASME TYPE PIPE CALIBRATION BLOCK NDT PAUT CALIBRATION BLOCK
These pipe calibration blocks are specially designed to facilitate phased array UT (PAUT). The ALCO block design includes various modifications to the original ASME design, including extra axial and arc length, a rearranged notch layout and a 10° angled cut on one end for blocks over 5″ NPS. These modifications help to minimize unwanted “noise” from the backwall while performing DAC/TCG calibrations with phased array UT equipment. A calibration block should be a section of pipe of the same nominal size, schedule, heat treatment and material specifications as the material being examined. we maintains a large inventory of raw material for the machining of these standards and they can be made from customer supplied material as well. The Phased Array Pipe Calibration Block contains 4 EDM notches (axial and circumferential on both OD and ID) at a depth of 8-11% of nominal wall thickness x 1/4″ maximum width (most notches are approximately .030″ – .040″ wide) x 1.000″ minimum length. Blocks 5″ NPS and smaller are left at 360°, while blocks over 5″ are milled to a 180°/120°/90°/60° arc section (depending on nominal pipe size). All blocks are 12″ in axial length minimum or 10T, whichever is greater. Made in accordance with ASME Section V Article 4 Figure T-43.3, with PAUT modification for PAUT.

