



Asset Reliability Inspections (ARI) is an Australian asset integrity/compliance company that offers heavy machinery inspection, pressure equipment inspection, pressure equipment design verification, weld inspection and non-destructive testing (NDT) services. ARI is a NATA accredited laboratory to ISO 17025 and also holds JAS-ANZ certification to ISO9001 – Quality Management Systems; ISO14001 – Environmental Management Systems & AS4801 – Occupational Health & Safety Management systems. These endorsements ensure the technical competency, quality and safety of our services whilst also ensuring minimal environmental impact.

Boiler Tube Weld Testing
ARI are leaders when it comes to the take up of new technology. We have invested in small diameter pipe scanners to better service the power generation industry. The scanners eliminate the need for radiation. Testing can therefore be performed during normal working hours without disruption to other work crews and without radiation exclusion boundaries. Our system is capable of inspecting small diameter pipe/tube welds, ranging from 20mm-115mm. It has a low profile to operate within gaps as small as 16mm, making it suitable for boiler tube inspection.
The equipment allows ARI to rapidly inspect welds in accordance with fabrication codes with the added benefit of producing a permanent digital record.
Corrosion Mapping
Curtin University of Technology research suggests that corrosion may be costing the Australian economy more than $30 billion each year, much of which is preventable. ARI have the latest in corrosion detection and mapping technology with phased array wheel probes and dual linear array probes with a resolution depth from 2mm. Both these units generate C scan images for our reports that clearly show the extend/depth of corrosion found.
Our equipment can be used on both ferrous and non-ferrous material. It is extremely portable and due to its size can be used in access restricted areas when compared to larger automated scanners.
Please contact ARI to discuss your phased array ultrasonic testing needs.

Digital radiography has been in use in Australia since 2005 and recently is gaining significantly more acceptance/use.
Today all major refineries in Australia use digital imaging for pipe wall thickness inspection and this is helped by new international standards.
Benefits of Digital Radiography:
ARI was one of the first companies to take up this technology and have ISO9712 certified staff specific to this technology.
Please contact ARI to discuss digital radiography inspection programs for your specific needs.

Weld Procedures – WPS and PQR (off the shelf ready to purchase)
ARI have certified Weld Inspectors that can witness, record variables and create weld procedure specifications (WPS) to both Australian and International Standards. We have many qualified weld procedures in our library that can be sold as off the shelf procedures that only require the addition of your company details and your acceptance of the document before they can be used. This means you can have a code qualified weld procedure (WPS) with the supporting procedure qualification record (PQR) information within an hour, saving you the time and potential failures of trying to qualify a procedure yourself. If we don’t have the process or material type you are after we may be able to make the procedure for you.
Weld Inspection
Weld inspection is required before, during and after welding to ensure quality and integrity is achieved and then maintained throughout the entire process. ARI have certified weld inspectors who can monitor your entire process or only a part of the process, if that is all that you require. We are then able to advise whether quality and compliance is being achieved to any standard you may be working to.
Welder Qualification
Many fabrication standards require welders to be tested before welding to ensure welder ability and project quality. These tests range from bend tests, fillet break, nick break, radiographic examination, ultrasonic examination and macro examination to name a few. ARI can assist in the entire process from witnessing weld tests and then qualifying welders by performing or managing the above tests.
Please contact ARI to discuss your weld inspection needs.

In the quality focused world we live in there are many reasons you may need to consider Positive Material Identification (PMI). Some of these may be:
Our Delta Professional handheld XRF is one the best PMI analysers on the market with light element detection capability supported by our extensive sample material library.
Please contact ARI to discuss your PMI needs.

ARI have professional Olympus IMS videoscopes that enable us to perform confident remote visual inspections. Our scopes have articulating ends, with changeable tips for both near and far field inspection and a 90 degree near field tip specific for heat exchanger tubing. With hours of video recording and still picture capture capability we are able to distribute and/or retain permanent records for future comparisons. The 6mm diameter makes it very accessible and a valuable tool for pressure vessel inspection.
Please contact ARI to discuss your RVI needs.