



Schwartz NDT is a Swiss-based Non Destructive testing company providing traditional and advanced NDT services to global clients. These services include:
VT, MT, PT, UT, ACFM
Advanced UT inspection including automated PAUT, TFM, TOFD.
Independent 3rd party automated UT analysis
IWE (International Welding Engineer)
Corrosion mapping using Olympus FlexoFORM / Sonatest Roller corrosion wheel
3rd party vendor inspection/verification
Rail Inspection - including manual & trolley inspection, PAUT analysis of defects, Full train load spec for UT & Eddy current inspection up to 50km/h
Rope Access NDT services
Rope Access Welding & Repair services
Boiler / Tube Inspection - LFET (Low-Frequency Electromagnetic Technique)-3D mapping
BFET (Balanced Field Electromagnetic Technique)
RFET (Remote Field Electromagnetic Technique)
IRIS - Heat exchangers
Storage tank floors - Falcon S (corrosion mapping)
Scout CUI - For corrosion under insulation
Automated Robotic Inspection on stainless steel and carbon steel vessels/tanks- Thickness measures, Visual inspection, Laser surface mapping, Spark testing (defect detection of coating or lining of equipment), Pulsed eddy current

Phased array ultrasonics is an advanced method of ultrasonic testing that is commonly used in industrial nondestructive testing. The beam from a phased array probe can be focused and swept electronically without moving the probe. The beam is controllable because a phased array probe is made up of multiple small elements, each of which can be pulsed individually at a computer-calculated timing and is generally regarded as a more reliable method of ultrasonic testing.

Time-of-flight diffraction method of ultrasonic testing is a sensitive and accurate method for the non destructive testing of welds for defects. Measuring the amplitude of reflected signal is a relatively unreliable method of sizing defects because the amplitude strongly depends on the orientation of the crack. Instead of amplitude, TOFD uses the time of flight of an ultrasonic pulse to determine the position and size of a reflector.

Rope access is a form of work positioning, initially developed from techniques used in climbing and caving, which applies practical ropework to allow workers to access difficult-to-reach locations without the use of scaffolding, cradles or an aerial work platform. Rope access technicians descend, ascend, and traverse ropes for access and work while suspended by their harness. Sometimes a work seat may be used. The support of the rope is intended to eliminate the likelihood of a fall altogether, but a back-up fall arrest system is used in case of the unlikely failure of the primary means of support. This redundancy system is usually achieved by using two ropes – a working line and a safety line.

Very short ultrasonic pulse-waves with frequencies ranging from 0.1-15 MHz are projected into materials to detect internal flaws or to characterize materials. Also commonly used to determine the thickness of the test object, for example, to monitor corrosion.

Magnetic Particle Inspection is a process for detecting surface and subsurface discontinuities in ferromagnetic materials such as iron, nickel, cobalt, and some of their alloys. This process is particularly sensitive to detecting fine cracks.