




Highly advanced multi-frequency, multi-channel, multi-parameter eddy current comparator with real-time harmonic analysis and built-in Industry 4.0 support
Overview
Multifect-GX is a sixth-generation versatile multi-frequency, multi-channel, multi-parameter eddy current comparator for segregation of metallic components and raw stock. The system outshines old-school instruments by implementing real-time analysis of harmonics of each test frequency. This enables sorting of components previously impossible with conventional instruments. The system is ideally suited for stringent quality checks of crucial automotive
Multifect-GX can test parts at up to 32 frequencies at one go. Components up to nine harmonics can simultaneously be analyzed for each frequency. Harmonics carry information about non-linearity of B-H curve of a material.
Applications
WHY HARMONICS?
Harmonics carry key information about the metallurgy of components
Ferromagnetic materials exhibit hysteresis in their magnetizing curve. Remanance, Coercivity values are important pointers to the metallurgy of the material. So also the area enclosed by the curve. When a sinusoidal excitation is applied to a non-ferromagnetic material, flux density is also sinusoidal. In case of ferromagnetic material the flux density has distortions. Voltage induced in pickup coils is a time-differential of this distorted flux density curve. This has harmonic content which depends on the non-linearity of the B-H curve. Typically hard materials have higher hysteresis, and result in higher harmonic content in the signal, and can be easily sorted out by analyzing the harmonics. It must be noted that say testing at the third harmonic of 100 Hz signal is NOT the same as testing at 300 Hz at all.
Features

Advanced rotating component eddy current system for detection of fine cracks on roto-symmetrical automotive and other precision components
Overview
Technofour Defectoscope-EX Test System detects surface-breaking cracks on finished roto-symmetrical components such as ball pins, gudgeon pins, piston rods, bearing races, rollers, cylinder liners, gear blanks, ammunition shells etc in production environment or at inward quality inspection.
The component is rotated while one or more probes scan the surface helically. Either the component advances past stationary probes as it rotates, or the probes themselves move over the component’s surface.
Applications
Defectoscope-LX is ideally suited for detection of fine surface cracks on precision components such as those used in automotive industries, aerospace, defence or other demanding applications.
Typically used for automobile components, the system can detect flaws as fine as 50 microns on polished surfaces.
Complete automation support is provided along with several kinds of custom-built mechanisms for scanning and sorting to maximize productivity.
Features